Build-outs across the city
New leases usually bring fresh build-outs: new walls, glass meeting rooms, kitchens and flooring, and every one of them leaves a film of fine dust behind when the contractor packs up.
Offices being converted into homes need the same care. Each conversion, tenant improvement and storefront refresh ends the same way, with a space that looks finished but is not yet clean.
Three passes from bare site to move-in
The rough clean comes while trades are still finishing. Debris left after the bulk haul-away is swept out, loose dust is vacuumed from floors and sills, and the space is cleared enough for painters, flooring installers and electricians to finish without tracking grit across new surfaces.
The final clean is the big one. It works from the top of each room down: light fixtures, vents and diffusers, the tops of door frames and cabinets, window sills and mullions, then counters, fixtures and finally the floors. Stickers and labels come off new glass and fixtures, cabinets are wiped inside and out, and restrooms and kitchens are detailed for first use.
A touch-up pass follows just before handover, picking up the dust that settles after punch-list fixes and furniture delivery, so the first people through the door see the space at its best.
Where construction dust hides in San Francisco buildings
Older San Francisco buildings hold dust in places a new suburban building simply does not have. Converted lofts have exposed beams, ductwork and brick that keep drywall dust long after the sanding stops. Downtown towers have long runs of window mullions and deep sills, and older storefronts come with trim, transoms and wood floors that need hand detailing.
Each of those details gets hand attention. High surfaces are dusted with extension tools before anything below them is wiped, so nothing falls back onto finished work, and fine dust is picked up with filtered vacuums rather than swept back into the air.
Floors, glass and carpet before opening day
New flooring is often the last thing installed and the first thing people notice. Hard floors are cleaned for their material, whether concrete, luxury vinyl, tile or wood, and new resilient tile can get its first coats of finish through commercial floor care. New carpet is vacuumed thoroughly to lift construction fines, and older carpet kept through a remodel can be refreshed with carpet extraction.
Glass gets its own pass. Interior partitions, new storefront windows and mirrors are cleared of tape residue, paint specks and fingerprints, and street-level glass can be finished by our window cleaning service so the frontage looks as new as the interior.
Working with contractors and incoming tenants
Post-construction cleaning fits the construction schedule rather than the other way around. We confirm with the general contractor or project manager when each phase is ready, which areas are still active and when the punch-list walk is booked, then time each pass so the space looks right when it counts. We send the general contractor and property manager our certificate of insurance before the first pass.
Tenants moving into a finished suite often want recurring service to begin the same week. The final clean is a natural starting point: rooms, surfaces and fixtures are already mapped, so recurring janitorial service picks up where the build-out clean left off.
Post-construction cleaning costs in San Francisco
Post-construction cleaning in San Francisco usually runs $0.35 to $0.70 per square foot for all phases, according to 2026 market data. A light final clean of a tidy suite starts near $0.25, and heavy builds with high ceilings, plenty of glass and a tight handover date reach about $1.00.
Work from the area being cleaned. A 6,000-square-foot office build-out, cleaned in rough, final and touch-up passes at $0.45, comes to about $2,700. A 1,200-square-foot storefront that needs only a final clean at $0.60 costs around $720, a higher rate because a small job carries the same setup.
The number of passes sets most of the price, followed by how much dust and debris the trades leave, ceiling height and fixtures that need ladders or lifts, the amount of glass, paint and adhesive removal, and how soon the space must be ready. We walk the site with you before quoting, so the figure reflects your project.
A few useful answers
Common questions
When does a San Francisco build-out need to get on the cleaning calendar?
As soon as the contractor sets a target handover date. The rough clean slots in as trades finish, and the final and touch-up passes are timed to the punch-list walk and your move-in day.
Is post-construction cleaning only for new buildings?
No. Tenant improvements, office-to-residential conversions, storefront remodels and smaller refreshes all leave construction dust that needs the same careful top-down clean.
Does the final clean cover windows and floors?
Yes. Interior glass, sills and floors are part of the final clean, and floor finishing or street-level window work can be added through our floor care and window cleaning services.
Can cleaning start while other trades are still on site?
Yes. The rough clean is meant for that stage, and we coordinate with the contractor so cleaning stays clear of active work areas.
Can recurring cleaning follow the build-out clean?
Yes. Once the space opens, the same rooms move onto a recurring schedule, with the final clean serving as the starting point for the routine.

