Busy offices, shared surfaces
Busy San Francisco workplaces see a steady flow of people. More people in a building means more hands on the same door handles, elevator buttons, coffee machines and restroom faucets every day.
Disinfection gives those shared surfaces extra care. It runs as part of SF Janitorial’s recurring service for the areas you choose, and it can be booked as a one-time visit before a reopening, a large event or the return of a team.
Clean first, then disinfect
Disinfectant works on a clean surface, not through grime. Soil, grease and residue shield the surface, so every disinfection visit starts with a proper clean: surfaces are wiped with a cleaner suited to the material to lift visible soil, and only then is the disinfectant applied.
Every product is an EPA-registered disinfectant, and it stays wet on the surface for the dwell time printed on its label before it dries or is wiped away. Products are matched to each surface, so stainless steel, glass, laminate and touchscreens are each treated with something that leaves the finish intact.
Cleaning, sanitizing and disinfecting, defined
The three words get used as if they meant the same thing, and they don’t. The EPA and CDC draw the lines this way, and a disinfection plan written on those lines tells you exactly what each surface receives.
- Cleaning removes visible soil, dust and residue with a cleaner and a cloth or pad. It comes first on every surface.
- Sanitizing is a lighter treatment with a product labeled as a sanitizer, often chosen for break-room tables and food-contact counters.
- Disinfecting uses an EPA-registered disinfectant left wet for the full dwell time on its label, on the high-touch points your plan names.
A good plan uses all three: cleaning across the floor, sanitizing in the kitchen and disinfecting at the door hardware, restroom fixtures and shared equipment. Our commercial disinfecting services follow that split on every visit, so each surface gets the treatment it needs and nothing more.
The touchpoints on every route
A disinfection route follows hands. In an office that means door handles and push plates, elevator buttons, light switches, shared desks and phones, conference tables, chair arms and the remote for the meeting-room screen. At the front desk it means the counter, the sign-in tablet and the pens visitors share.
Restrooms get faucets, flush handles, partition latches, dispensers and door hardware done on every visit. Break rooms get refrigerator and microwave handles, coffee machine buttons, the sink tap, tables and the water dispenser. Entry areas close out the route with push bars, railings and the handles on the main doors.
Shared desks and hot-desking floors
Hybrid offices and hot-desking floors can put several people at the same desk in a single week. Shared desk surfaces, docking stations, monitor arms and chair arms are cleaned and disinfected on the days the floor is busiest, and shared keyboards in hoteling areas can join the list.
Fitness rooms in office buildings, shared kitchens in coworking spaces and the equipment in production studios each have their own touchpoints, and the plan names them one by one so nothing is missed.
Routine schedules and on-request visits
High-touch disinfection works best on every recurring visit, with restrooms and break rooms done each time. Before a company event, after a busy conference week or whenever an office wants a full reset, an on-request visit adds a complete touchpoint pass across the whole floor.
A day porter can repeat the most-used touchpoints in the middle of the workday, so lobbies, restrooms and kitchens stay fresh between evening visits. Medical practices can see how we disinfect to their protocol, including terminal cleaning, on our medical office cleaning page.
What a first disinfection visit looks like
The first visit starts before the crew arrives. At the walkthrough, your office manager and our supervisor go through the floor together, mark the touchpoints that see the heaviest use and flag surfaces that need special care, such as a lacquered reception desk or a row of booking tablets outside the conference rooms. That list becomes the route the crew follows from then on.
On the night itself, the crew works through the floor in the order the plan sets, cleaning each surface and then leaving the disinfectant in place for its label contact time. Personal items on desks stay where they were left. Older San Francisco buildings often keep original brass or bronze door hardware, and that metal gets a product that won’t dull it. Afterward, a supervisor carries out a quality inspection of the route, and any spot that needs another look is noted for the next visit.
What shapes the price for disinfection
Added to recurring service, disinfection is priced by how many areas and touchpoints you choose and how often each gets a pass. Floor size, the number of restrooms and kitchens, the amount of shared equipment and any daytime repeats shape the figure. One-time visits are priced on the whole area covered.
A walkthrough identifies the touchpoints that matter most in your building and sets them out in the plan, so you know which surfaces are covered on every visit.
A few useful answers
Common questions
How does disinfecting differ from routine cleaning?
Cleaning removes visible soil and residue. Disinfecting applies a disinfectant and leaves it in place for its label contact time, and it works properly only on a surface that has been cleaned first.
Are the disinfectants EPA-registered?
Yes. Every disinfectant the crew applies is EPA-registered, and it stays wet on each surface for the full dwell time on its label before anyone wipes it or lets it air-dry.
Can disinfection be added to our recurring service?
Yes. High-touch points, restrooms and break rooms can be disinfected on every visit or on the days you choose.
Is one-off disinfection available for a San Francisco office?
Yes. A one-time visit suits a reopening, a team returning to the office, a large event or any time you want a full touchpoint pass.
Which surfaces are disinfected?
Door hardware, elevator buttons, switches, shared desks and phones, conference tables, restroom fixtures, break-room appliance handles and entry push bars, plus anything else your plan names.
Will disinfectants damage our finishes?
Products are matched to each surface, so glass, stainless steel, laminate, wood and screens each get a product suited to them.
Services

